Essays on Electronic Engineering

Electro-Bionic Energy System
Words • 1555
Pages • 7
Is it possible to create an electro-bionic energy system that could allow central wireless power transmission to a remote body sensor network, or wearable devices through skin as a potential charge carrier? Perhaps, the question would not have poked me until a mind ingrained conversation with Dr. Ivan Lee from College of Information and Computer Science at University of Massachusetts, Amherst during IEEE BSN’19 conference. Before hoping into this thought, I was wandering at the intersection of human body and…...
Electrical EngineeringElectronic EngineeringElectronicsResearchTechnologyVlsi Technology
Task about Dsb-lc
Words • 1372
Pages • 6
The essay sample on Dsb-lc dwells on its problems, providing shortened but comprehensive overview of basic facts and arguments related to it. To read the essay, scroll down.North South University ETE 321 – Spring 2010 Instructor: Nahid Rahman Assignment #1 Total Marks: 100 Worth: 7. 5% 1. Consider the sinusoidally modulated DSB LC signal shown below. The carrier DSB-LC frequency is ? c and the message signal frequency is ? m. (a) Determine the modulation index m. Solution: Amax =…...
Electrical EngineeringElectricityElectronic EngineeringElectronicsRadio
Essay On Monitor
Words • 2077
Pages • 9
The sample paper on Essay On Monitor familiarizes the reader with the topic-related facts, theories and approaches. Scroll down to read the entire paper.————————————————- Abstract: Blood Collection Monitor is helpful for accurate blood collection; it’s a compact instrument to provide smooth and gentle rocking of homogenous mixing with anti coagulant ; i. e. without clot formation of blood cells during collection of blood from a donor. BLOOD COLLECTION PROCESS IS HAPPENING IN DIFFERENT ENVIRONMENTS. THE CHALLENGE TO PHLEBOTOMIST (One who draws…...
Blood DonationElectrical EngineeringElectricityElectronic EngineeringElectronicsForce
Save time and effort. Get incredible results with the help of our writers.
Hire a Pro to Write You a 100% Plagiarism-Free Paper.
Get My Paper
Inexpensive Plasma Television
Words • 1799
Pages • 8
Paper Type:Informative essays
This sample paper on Inexpensive Plasma Television offers a framework of relevant facts based on the recent research in the field. Read the introductory part, body and conclusion of the paper below.The intent of this study is to do a comparative analysis of LCD and Plasma telecastings, so the mean consumer can do an enlightening determination on what best suits their demands. With 100s of different theoretical accounts and industries, it can be hard to do a logical determination. There…...
Electrical EngineeringElectronic EngineeringElectronicsFilm IndustryFilmmakingTelevision
Inverting And Noninverting Amplifier Lab Report
Words • 1098
Pages • 5
This sample essay on Inverting And Noninverting Amplifier Lab Report provides important aspects of the issue and arguments for and against as well as the needed facts. Read on this essay's introduction, body paragraphs, and conclusion.In this report, we Will go through two experiments, Which are the fundamental circuits of operational amplifiers: non-inverting and inverting amplifier circuits, to analyze the difference between ideal and real pop-amps. For the following section, the relevant theory will be introduced, and then the detail…...
Computer ScienceElectrical EngineeringElectricityElectronic EngineeringElectronics
Thevenin Equivalent Resistance
Words • 1237
Pages • 5
This sample essay on Thevenin Equivalent Resistance offers an extensive list of facts and arguments related to it. The essay's introduction, body paragraphs, and the conclusion are provided below.When using a voltage or current that varies, certain components that would not work with a direct current become functional. The capacitor is this type of component. It is made up of two conducting pieces of material that are a small distance apart and are separated by an insulator (or dielectric). The…...
Electrical EngineeringElectricityElectronic EngineeringElectronicsForcePhysics
Rc Lab Equation Solution
Words • 851
Pages • 4
Then the current ceases and the capacitor is fully charged.  A capacitor in series with a resistor. The left figure represents the circuit before the switch is closed, and the right after the switch is closed at t=O. The question arises on how does the current in the circuit varies with time while the capacitor is being charged. To answer this, we will apply Kerchiefs second rule, the loop rule, after the switch is closed E”IR” where q/C is the…...
Electrical EngineeringElectricityElectronic EngineeringElectronicsMathematicsPhysics
Positive Feedback Amplifier
Words • 537
Pages • 3
FEEDBACK AMPLIFIER FEED BACK: The process of applying a fraction of output energy of some device back to the input known as feedback. FEEDBACK AMPLIFIER: The amplifier using feed back process is called feedback amplifier. TYPES OF FEEDBACK AMPLIFIER: There are two types of feedback amplifier: a)Positive feedback amplifier b)Negative feedback amplifier POSITIVE FEEDBACK AMPLIFIER: >The amplifier in which feedback energy is applied in the same polarity or in same phase is called as positive feedback amplifier. increases the voltage…...
Computer ScienceElectrical EngineeringElectricityElectronic EngineeringElectronics
Basic Principles and Benefits of Ssbsc
Words • 747
Pages • 3
Before investigating the various ways of creating a SSBSC signal it would be prudent to understand the basic principal of such systems and their advantages. SSBSC technology has developed so as to over come some of the inefficiencies of DSBSC (Double Sideband Suppressed Carrier) technology. In both systems the signal information is carried in the side bands of the carrier frequency. However DSBSC transmits both sidebands and the suppressed carrier even though signal information from one sideband would be sufficient.…...
Electrical EngineeringElectricityElectronic EngineeringElectronicsRadio
Introduction To Electrical Circuits Lab Report
Words • 647
Pages • 3
In order to correctly set up the breadboard, the ululations were used to determine which set of resistors needed to be matched together. Each color on the resistor represents the resistors value. The first and second bands represent the first two digits of the resistor value, the third band represents the multiplier, and the fourth band is the tolerance. After adding up the total resistor values, it is significant to match up the resistors to create a total of the…...
Electrical EngineeringElectricityElectronic EngineeringElectronicsForce
Circuit Lab Report
Words • 505
Pages • 3
The following sample essay on after completing these parts our aim is to see the operation oscilloscope and analyze simple circuits. Experimental work; In the first part of the experiment we read the colors of given resistors. There were 4 resistors in the kit. Three of them were same because their colors at the right hand side were same an done of them was different. The color of 3 resistors were orange and other one was red so when we…...
Electrical EngineeringElectricityElectronic EngineeringElectronicsForce
Transmit Filter and Multi Secrecy Aided Optimization with DFE for Duplex Systems
Words • 1912
Pages • 8
The following example essay on "Transmit Filter and Multi Secrecy Aided Optimization with DFE for Duplex Systems" on the problem of secure transmission in wireless communication, especially in the physical layer. The interconnectivity of devices in Cyber-Physical systems under wireless environments facilitates information exchange but challenges network security. In order to proliferate secrecy, with the assumption of channel reciprocity, the legitimate users share the same channel which is independent of the channels between the legitimate users and the eavesdropper. It…...
CommunicationComputer ScienceCyber CrimeCyber SecurityElectrical EngineeringElectronic Engineering
Automatic Room Light Controller with Didirectional Visitor Counter
Words • 2586
Pages • 11
CHAPTER :- 1 Project Overview 1. Introduction Of Project 1. 1 Project Definition: Project title is “AUTOMATIC ROOM LIGHT CONTROLLER WITH BIDIRECTIONAL VISITOR COUNTER “. The objective of this project is to make a controller based model to count number of persons visiting particular room and accordingly light up the room. Here we can use sensor and can know present number of persons. In today’s world, there is a continuous need for automatic appliances with the increase in standard of…...
Computer ScienceComputersElectrical EngineeringElectronic EngineeringElectronics
Bsnl Training
Words • 4222
Pages • 17
A TRAINING REPORT ON BROADBAND SERVICES ------------------------------------------------- SUBMITTED TO: SUBMITTED BY: Training & Placement Cell MUDIT GUPTA (S. D. COLEGE OF ENGG. & BRANCH – C. S. TECHNOLOGY) SEM. – VII CERTIFICATE This is to certify that the training report entitled bSNL bROADBAND SERVICES submitted is a bonafide study work carried out by MR. MUDIT GUPTA under the supervision and guidance of SH. K. P. SINGH. During training period, trainee has learnt about overall exposure of RLU exchange, telecommunication network…...
CommunicationComputer NetworkingComputer ScienceElectrical EngineeringElectronic EngineeringElectronics
Rfid Based Attendance System
Words • 6112
Pages • 25
The attendance system is basically an embedded one. Embedded stands for ‘hardware controlled by software’. Here, the software using a microcontroller controls all the hardware components. The microcontroller plays an important role in the system. The main objective of the system is to uniquely identify and to make attendance for a person. This requires a unique product, which has the capability of distinguishing different person. This is possible by the new emerging technology RFID (Radio Frequency Identification). The main parts…...
Computer ScienceComputersElectrical EngineeringElectronic EngineeringElectronics
Master’s Degree Studies at NMSU
Words • 808
Pages • 4
Statement of Purpose My name is Carlos Nieva. I received the degree of Bachelor of Science in Electronics and Telecommunications in the fall of 1998 from ITESM (Instituto Tecnologico y de Estudios Superiores de Monterrey), Mexico. I received the degree of Master of Science in Electrical Engineering in the fall of 2002 from NMSU (New Mexico State University). My advisor and co-advisor during my Master’s degree studies were Dr. Jaime Ramirez-Angulo and Dr. Paul Furth, respectively. The topic of my…...
Computer ScienceElectrical EngineeringElectricityElectronic EngineeringElectronics
Pulse Width Modulation Final Year Project
Words • 1661
Pages • 7
The following essay example is about the final year of the Pulse Width Modulation project. Read the introduction, body and conclusion of the essay, scroll down. Chapter 1 Introduction 1. 0 Background Pulse Width Modulation (PWM) is a type of devices that can be used as a DC motor speed controller or light dimmer. PWM is used extensively for speed controller where power-saving application is needed. This device has been used as a motor speed control for small DC fans,…...
Computer ScienceElectrical EngineeringElectricityElectronic EngineeringElectronics
We've found 17 essay examples on Electronic Engineering
1 of 1
Let’s chat?  We're online 24/7