Effects Of Industrial Pollution On Human Health

Moreover high quality machinery should be used and should be roper installed. The awareness campaign should also be arranged to aware the industrialist about the harmfulness they are creating for the people and also the people should be aware of the danger they are living with. Introduction Industrialization one hand provide us ease but the black side of these industries is that they are too much harmful for our health due the wastage they are producing and also the dangerous gases the are discharging in the air everyday.

These gases not only affect our health but it is also destroying the ozone layer.

The destroying of this ozone layer is resulting in the rise of enrapture. Evidence suggested that over 14 common diseases involving perhaps 90000 deaths a year could be conservatively linked to the results of industrial pollution in KICK. In France 40% of hospital admissions linked to industrial pollution. (Fresh, 2005). The industrial sector of Islamabad is located in 1-9 and I-I O sector on the boarder of Islamabad and Rawlins which was established in 1963.

The Industrial state comprises of more then 200 factories spreader over 625 acres of land. These industries are managed by the CAD (Capital Development Authority).

CAD is providing the water supply to the industries but numbers of industries have installed their own tube wells due to inadequate supply of water from CAD. The natural drains eventually lead to a single drain in the area known as Annual Ala. The entire electricity equipment is provided by WPAD. In the master plane of industrial state of Islamabad the industries are isolated from the residential areas through a buffer zone but now the residential area is developed very closed to the industrial areas because of the removal of buffer zone by CAD.

Get quality help now

Prof. Finch

Verified

Proficient in: Environmental Science

4.7 (346)

“ This writer never make an mistake for me always deliver long before due date. Am telling you man this writer is absolutely the best. ”

+84 relevant experts are online

Hire writer

Industrial state has been categorized into eight segments I. E. Tell melting furnaces, rolling mills, flour mills, oil and ghee, marble cutting and polishing, pharmaceuticals gallivanting metal working and engineering. The detail of different industrial units operating in industrial area of Islamabad is indicated below. Types and number of factories I Types of Industries II steel melting furnaces, I Approximate number 8 12. Relining mills 13. Flour mills, 14. Oil and ghee 5. Marble cutting and polishing units 16. Pharmaceuticals 7. gallivanting 18. Metal working and engineering units Total 125 15 110 12 23 Survey report-Environmental report of industrial estate Islamabad

Industrial Pollution Effects

Government of Pakistan (2006) environmental survey in the industrial area of 1-9 and 1-10) The steel melting industries are contributing heavily to air pollution in the industrial state of 1-9 and 1-10. The furnaces produces metal dusts, slam and gaseous emissions. Smoke is produced during charging of the furnace. Air emission from the industry includes nitrogen dioxide, secular dioxide and carbon monoxide and thick black smoke. Particularly pollution is generated due to poor quality of scrap bundled Scrap which is being used by Meltzer consists mainly of spent containers of edible oil, paints lubricants and even Auber.

There are 11 re-rolling mills and using locally manufactures billets, which are reheated in gas or oil fired open gas furnace. The environment related issue is the occasional discharge of black smoke. Large quantities of steam are used as a main heating medium in ghee manufacturing processes. Steam is also used for creating the vacuum required in ghee manufacturing. During this time major air emissions are nitrogen dioxide, sulfur dioxide and carbon monoxide. The extremely high level of consumption of fresh water by these industries has resulted in generation of large volume of waste water.

Major waste water pollutants from this industry include oil and grease, soaps and suspended solids. There are 31 marble cutting and polishing units in the industrial area of Islamabad The excess water displaced by the gathering sludge overflows without properly settling and is discharged into the effluent channels of the industrial estate. This water carries large amounts of marble powder, which gradually settles at the bottom of the drain channels. The marble sludge in the settling tanks is removed periodically and dumped in the vicinity of the factory.

Eventually; the sludge dries in the sun and its particle become airborne. This causes air pollution problems for the inhabitants of the surrounding area. In some marble units, settling pits are not cleaned as scheduled, clogging effluent drain channels in the vicinity of the marble unit. Disposal of recovered sludge is the major environmental problem facing the marble manufacturing units. Another solid wastes generated by the marble units is the cutting waste. There are about ten pharmaceutical industries in III.

Sulfuric acid is being used extensively to remove dust and scale. Gallivanting process releases acidic fumes and generate waste waters and solid wastes. Objectives 1 . To study the socio-economic conditions of the respondent. 2. To study the factors affecting health of people in the industrial area of Islamabad. 3. To explore the awareness among people in industrial area regarding environmental pollution on health problem statement Effects of the air pollution coming out of industries affecting the health of people living in the sectors of Islamabad (1-9 and I-ID).

RESEARCH METHODOLOGY Methodology is actually is a system of principles which guide the scientific investigation. The purpose of methodology is to describe the research deign. It works as the guideline for the researcher. In the present research the data will be analyzed with the help of statistical package for Social sciences. A prepared set of questions will be designed to generate data necessarily for accomplishing the objectives of the research project. In order to conduct the present research, quantitative research method was used to get the proposed information from the respondents.

A sample of 260 respondents had been drawn through simple random sampling techniques, 104 respondents had been selected from 1-9 sector and 156 respondents had been selected from I-I Sectors. In the present study the data was collected tit the help of interview schedule. An interview schedule is a set of questions, which are asked to the respondents in face to face interaction. The data was systematically tabulated and statistically analyzed to bring into equivalent forms. Different statistical tools and techniques were used for the analysis and interpretation of results. The data was analyzed by SPAS.