Ict Hazards and Environmental Hazards

This sample essay on Ict Hazards reveals arguments and important aspects of this topic. Read this essay’s introduction, body paragraphs and the conclusion below.

The ensconce of this additional use will be an increasing impact on the environment; this will happen despite the fact that some CIT devices are more efficient, and with a potentially smaller effect on the environment. Although its effects on our everyday lives are obvious, the hazardous effects that this technology may have on the environment are much less clear and seldom talked about and are often neglected or overlooked.

These impacts can be expressed throughout the lifestyle (from the manufacturing, use and disposal) of the CIT product.

Both the inefficient use of energy and the manufacturing and disposal of product leads to the generation and release of toxic compounds into the environment. This report exposes some of the hazardous effects on the environment resulting from the use of CIT and suggests possible recommendations. The implementation of these recommendations would go a long way in maximizing the efficient use Of CIT product and significantly minimize the hazardous impacts of CIT on the environment at large.

LITERATURE WORK CIT is an industry in a state of constant change and development, with the continuous production of new, different, and more advanced devices. The manufacturing of these products, therefore, implies a very high level of technology and the use of specific elements/chemical compounds. Some of these elements can be very toxic; heavy metals such as cadmium (Cd), lead (BP) and arsenic (As), for instance, are all present in desktop computers or in standard computer monitors.

Get quality help now

Doctor Jennifer

Verified

Proficient in: Manufacturing

5 (893)

“ Thank you so much for accepting my assignment the night before it was due. I look forward to working with you moving forward ”

+84 relevant experts are online

Hire writer

Other compounds are also hazardous. An example can be the use of predominated flame retardants (Bars).

Short Essay On Environmental Hazards

Bars are chemicals which are applied to the electronic parts of the devices for safety reasons. The environment is exposed to hazard resulting from the use of CIT. Exposure to the toxic compounds mentioned above can take place after the disposal of the CIT devices. There can be exposure, for instance, if these elements/chemicals leach from a landfill into the environment; clearly this process can cause damage and have noticeable impacts on the environment, both short and long term. The incineration of parts of the CIT devices may also cause exposure to hazardous substances.

The incineration of waste which contains these kinds of chemicals is forbidden by law. It can happen, however, that these parts may be accidentally incinerated together with other mommies waste. This can be particularly dangerous if Firs are present, as during the combustion they can form predominated dioxins – very toxic molecules. Another possible source of exposure is the re-use and/or recycling of these devices, or of part of the devices. Strict regulations are in place to recycle materials which may contain toxic elements; these, however, are not always applied in developing countries.

In places like China, India or in some African countries, there is an “informal” market, to recover and reuse the valuable compounds of these CIT devices. Metals such as gold or copper, for instance, are present in the majority of the devices; they are recovered using processes without any safety precautions; these processes can generate hazardous compounds, posing a threat both to the environment and to the workers involved in them. Energy consumption is another problem associated with CIT devices and it is also an important issue to consider.

For the majority of CIT devices, a greater proportion of the energy is necessary for manufacturing the device than for using the device itself. CIT and Environments The environmental problems associated with computers are two-fold. High energy consumption and highly toxic component materials are currently inherent characteristics Of CIT products, thus making their production, use and disposal ecologically unsound. These two major problems would be the main focus of this work and would be discussed extensively. Energy Consumption Globally speaking, the issue of energy consumption is one that involves all sectors and industries.

According to Norfolk (1990) and Oakmont (2002), electronic office equipment such as desktop computers uses significant amounts of electric power. Atypical CPU uses 120 Watts 1 joule/second) f electricity, while a CRT monitor consumes added 1 SOW (United States Department of Energy, 2005). This implies that a standard office computer which is left on 8 hours per day, for 5 days a week can consume up to 561. 6 k of fossil fuel derived energy. However, this figure more than triples if such a computer is left on throughout the night or during the entire week.

Physical components and Toxin Desktop computers generally consist of three major units: the main processing machine (CPU Consisting of power supplier, fan, ICC boards, DVD drive, CD drive, hard disk, soft disk and shell casing), the monitor and the aboard. These major units are composed Of various materials, which, in turn consist of a wide range of Chemicals, elements and heavy metals. Some of these materials, such as platinum, have a high recovery and recycling efficiency (95%), while others cannot be recycled at all (e. G. Mercury, arsenic and barium).

There are, however, two desktop components that represent the largest environmental hazards with respect to availability, monitors containing Crust and flame retardant plastics. Need for Green computing The extensive use of computers and IT has made our life easier and as such he use of IT is ever on the increase resulting in greater power consumption. Greater power consumption means greater emission of greenhouse gases like carbon dioxide. It is observed that most of the computer energy is often wasteful. This is because we leave the computer ON even when it is not in use.

The CPU and fan consume power; screen savers consume power even when the system is not in use. Insufficient power and cooling capacities can also results in loss of energy. It is observed that most of the decanters do not have sufficient cooling capacities. This results in environment pollution. This could be because of defects in Manufacturing techniques, packaging, disposal of computers and components. Another effect is because of toxicity. There are toxic chemicals used in the manufacturing of new computers as well as disposal of old computers and components which can enter the food chain and water.

Green computing is the environmentally responsible use of computers and related resources. Such practices include the implementation Of energy-efficient central processing units (JPL’S), servers and peripherals as well as reduced resource consumption and proper disposal of electronic waste (e-waste). One of the earliest initiatives toward green computing in the United States was the voluntary labeling program known as Energy Star. It was conceived by the Environmental Protection Agency (EPA) in 1 992 to promote energy efficiency in hardware of all kinds.

The Energy Star label became a common sight, especially in notebook computers and displays. Similar programs have been adopted in Europe and Asia. Government regulation, however well-intentioned, is only part of an overall green computing philosophy. The work habits of computer users and businesses can be modified to minimize adverse impact on the global environment. Here are some steps that can be taken: * Power-down the CPU and all peripherals during extended periods of inactivity. * Try to do computer- related tasks during contiguous, intensive blocks of time, leaving hardware off at other times. Power-up and power-down energy-intensive peripherals such as laser printers according to need. * Use liquid-crystal-display (LCD) monitors rather than cathode-ray-tube (CRT) monitors. * Use notebook computers rather than desktop computers whenever possible. * Use the power-management features to turn off hard drives and displays after several minutes Of inactivity. * Minimize the use Of paper and properly recycle waste paper. * Dispose of e;waste according to federal, state and local regulations. * Employ alternative energy sources for computing workstations, servers, networks and data centers.

Approaches to Green Computing Fertilization: Computer fertilization is the process of running two or more logical computer systems on one set of physical hardware. With fertilization, a system administrator could combine several physical systems into virtual machines on one single, powerful system, thereby unplugging the original reward and reducing power and cooling consumption. One of the primary goals of almost all forms of fertilization is making the most efficient use of available system resources. Fertilization highlights the idea of “Green Computing’; by consolidating servers and maximizing CPU processing power on other servers.

Storage fertilization makes it possible for systems to access a shared storage subsystem. Avis clear that this approach would reduce the number of storage devices needed, the amount of power required, the heat produced and, as a wonderful side effect, would reduce the operational ND administrative costs of backup, archival storage etc. Power Management: Lower power consumption also means lower heat dissipation, which increases system stability, and less energy use, which saves money and reduces the impact on the environment.

The Advanced Configuration and Power Interface (ASPI), an open industry standard, allows an operating system to directly control the power saving aspects of its underlying hardware. This allows a system to automatically turn off components such as monitors and hard-drives after set periods of inactivity. In addition, a system ay hibernate, where most components (including the CPU and the system RAM) are turned off. ASPI is a successor to an earlier Intel Microsoft standard called Advanced Power Management, which allows a computer’s BIOS to control power management functions.

Power management for computer systems are desired for many reasons, particularly: * Prolong battery life for portable and embedded systems * Reduce cooling requirements. * Reduce noise. * Reduce operating costs for energy and cooling. Power supplies Power supplies in most computers (Us for short) aren’t designed for energy efficiency. Infant, most computers drain more power than they need during normal operation, leading to higher electrical bills and a more dire environmental impact.