Parallax Error Chemistry

Initial hypothesis: A 1 Ox eluted potassium dichloride solution have an expected spectrophotometer reading of 1. 000 while a xx diluted potassium dichloride solution have an expected spectrophotometer reading of 0. 200. The result we obtained correlates strongly to the hypothesis, albeit with a spectrophotometer reading error reaching as high as +0. 07 which is still in the acceptable range. We obtained 1. 066 spectrophotometer reading for our xx diluted potassium dichloride solution and 0. 224 spectrophotometer reading for our xx diluted potassium dichloride solution.

Questions: . What is the magnitude of parallax error indicated on each piece of volumetric glassware? If the mark on the volumetric is exceeded, is it considered parallax error? The magnitude of parallax error indicated on each piece of volumetric glassware is low because volumetric glassware are made to measure volume of liquid very accurately with a given marker.

If the mark on the volumetric is exceeded, it is be considered parallax error due to the position of eyes and the angle towards the mark on the glassware of the users.

Parallax error means using he instrument is incorrectly but still gets error which are not the true value. [5] 2. Calculate the percent error when u fill the moll volumetric flask to the mark and add another Mil to cause the meniscus to exceed the mark. Should you discard your solution if u accidental exceeded the mark by 0. CM? Percentage value-ObservedExpectedx100 Percentage XIII Percentage error -0. 2% No, we shouldn’t, as referred to reference 4, Volumetric glassware are only accurate when they are at their calibration temperature. Hence temperate affects the accuracy of the volumetric flask.

Get quality help now
Marrie pro writer
Verified

Proficient in: Chemistry

5 (204)

“ She followed all my directions. It was really easy to contact her and respond very fast as well. ”

+84 relevant experts are online
Hire writer

What Is Parallax Error In Chemistry

Based on the percentage error, Mil is not equal to LLC where it shows slightly inaccuracy of the volumetric flask. Volumetric flask normally works accurately under ICC. [4] 3. Are beakers, conical flask and laboratory bottles with volume markings considered volumetric glassware? Why? No, because volumetric glassware are specialized pieces of glassware which are used to measure volumes of liquids very precisely and accurately in laboratory works.

Cite this page

Parallax Error Chemistry. (2019, Dec 05). Retrieved from https://paperap.com/paper-on-chemistry-lab-report-7/

Parallax Error Chemistry
Let’s chat?  We're online 24/7